MULTISOFT DGR-1000, User Manual, Page: 15 / 83

Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
15
ID Section Description
1
Device status Basic device information like Serial number, installed firmware version,
memory use, temperature etc.
See 4.1.1, p. 15
2
Power Power supply status information
See 4.1.2, p. 16
3
Network Network interfaces’ status and configuration including current IP
addresses, MAC addresses and link speed.
See 4.1.3, p. 17
4
Video Video capture process status information
See 4.1.4, p. 18
5
NTP Information related to time synchronization
See 4.1.5, p. 22
Table 1: Description of sections within the Status page
4.1.1. Device status
1
2
3
4 5
6
7
8
Figure 13: Device status section of the Status page
ID Parameter Description
1
Serial Number Unique number that identifies Video Grabber
2
Unique ID Identifier of the main chip
3
Software ver. Version of software installed on the Video Grabber
4
Software ID Unique identifier of the software installed on the Video Grabber
5
Uptime (total) Time since last restart along with sum of all uptimes (total) since the
device was produced
6
Free memory The amount of free RAM on the device
7
Temp. CPU Temperature of the CPU
8
Temp. PCB Temperature measured on the main Printed Circuit Board (PCB)
Table 2: Description of the parameters available in the Device status section of the Status page