WTE5C/WTE5HP SERIES WATER TRAILERS — SERVICE BULLETIN WT20180925 — 10/01/18 — PAGE 7
6. Using a hammer,
gently tap
(prevents damage to
screw head) the screws so that they lay flush against
the bracket (Figure 14A~D)
Figure 14. Tapping Axle Mounting Screws
A
B
D
C
Axle Wiring
CURB-SIDE
There are two wires extending from the axle tube as shown
in Figure 15, connect these wires as follows:
1. Using butt connectors (P/N 2540), attach the two wires
coming from the axle tube to the two wires coming
from the hub wire harness (Figure 15).
Figure 15. Curb-Side Wiring
STREET-SIDE
There are two wires extending from the axle tube as shown
in Figure 16, connect these wires as follows:
1. Using splice terminal connectors (P/N 19761), attach
the two wires coming from the axle tube to the two
wires coming from the hub wire harness (Figure 16).
Figure 16. Street-Side Wiring
NOTICE
Wire colors may be different than those shown in
Figure 15.
BUTT
CONNECT
ORS
AXLE
TUBE
HUB
WIRE
HARNESS
NOTICE
Wire colors may be different than those shown in
Figure 16.
BUTT
CONNECT
ORS
AXLE
TUBE
HUB
AXLE TUBE
HUB
WIRE
HARNESS
SPLICE
CONNECTORS
