JWN- SERIES • RIDE-ON POWER TROWEL — PARTS AND OPERATION MANUAL — REV. #7 (03/02/07) — PAGE 17
JWN-SERIES — CONTROLS AND INDICATORS
Figure 2. JWN-SERIES Controls and Indicators (Front)
9.
Fuel Gauge/Filler Cap - Indicates the amount of fuel in
the fuel tank. Remove this cap to add fuel.
10. Fuel Tank - Holds 5 gallons of unleaded gasoline.
11. Left Foot Riser – Operator foot rest pedal.
12. Spray Nozzle – Spray nozzle for retardant.
13. Right Foot Pedal – Controls blade speed. Slow blade
speed is accomplished by slightly depressing the foot pedal.
Maximum blade speed is accomplished by fully depressing
the foot pedal.
14. EZ- Mover Boss – Front attachment point for EZ Mover.
Used to move the trowel.
15. Dip Stick- Access hole provided to check engine oil.
16. Spark Plug- Access the spark plug through this cutout.
1
7
4
4
5
2
6
9
2
3
8
10
14
12
15
11
16
13
14
1.
Seat – Engine will not start unless operator is seated.
2.
Steering Control Levers -Directs the unit forward, reverse,
left, or right.
3.
Retardant Spray Control Button – Sprays retardant
through the nozzle at the front of the machine.
4.
Twin Pitch Control – Both pitch towers are linked together.
One crank may be turned to adjust the blade pitch
simultaneously or individually controlled for each set of
blades. Turn the crank as marked on its top surface to
increase or decrease blade pitch.
5.
Light Switch – Turns on three halogen lights. Two in front
one in rear.
6.
Ignition Switch – With key inserted, turn clockwise to
start engine.
7.
Hour Meter - Indicates number of hours the engine is run.
8.
Choke Control Lever - In cold weather pull this lever to
start engine. After engine warms push knob all the way in.
Go to Discount-Equipment.com
to order your parts
