PAGE 24 — STOW MS-93 MIXER — OPERATION MANUAL — REV. #5 (03/26/10)
4. Turn the engine switch (Figure 14) to the
ON
position.
5. The main
start/stop
switch located on the engine cover
is (Figure 15) is used to start and stop the engine. Pull
this switch outward to start the engine.
6. Place the
belt slip lever
(Figure 16) in the
STArT/STOP
(disengaged) position.
Figure 16. Belt Slip Lever
(Start/Stop Position)
7. Pull the
starter grip
(Figure 19) lightly until you feel
resistance, then pull briskly. Return the starter grip gently.
Figure 19. Starter Grip
Figure 18. Drum Lock Pin (Right Position)
Figure 17. Drum Lock Pin (Side-View)
Make certain the
drum lock pin
(Figures 17
and 18) is
placed to the
RIGHT
(when viewing the mixer from the
towpole end) of the drum stop block which is welded to
the front side of the drum. Also make sure lock pin is fully
engaged (locked). This will prevent the drum from tipping.
CAUTION
Figure 15. Start/Stop Switch (gasoline engine)
Figure 14. Engine ON/OFF Switch
Preventing Drum Tipping
MS-93 PLASTER/MORTAR MIXER — START-UP PROCEDURES
Summary of Contents for Stow MS-93
Page 37: ...STOW MS 93 MIXER OPERATION MANUAL REV 5 03 26 10 PAGE 37 NOTE PAGE...
Page 42: ...PAGE 42 STOW MS 93 MIXER OPERATION MANUAL REV 5 03 26 10 FRAME ASSY STOW MS93 MIXER FRAME ASSY...
Page 50: ...PAGE 50 STOW MS 93 MIXER OPERATION MANUAL REV 5 03 26 10 STOW MS93 MIXER AXLE ASSY AXLE ASSY...
Page 92: ...STOW MS 93 MIXER OPERATION MANUAL REV 5 03 26 10 PAGE 93 NOTE PAGE...
