MQ-MIKASA MVH-702DRSC COMPACTOR — PARTS & OPERATION MANUAL — REV. #1 (12/17/03) — PAGE 15
MVH-702DRSC — COMPACTOR COMPONENTS
Figure 3 illustrates the location of the major components for the
MVH-702DRSC Reversible Plate Compactor. The function of
each component is described below:
1.
Monitoring Lights –
Indicates if there is any failure in the
machine. There are four monitoring lights:
Receiving Failure Light
Oil Pressure (Engine) Failure Light
Regulator Failure Light
E/G Overheat Light
2
.
Lifting Hook Lever –
Used to lift the machine.
3
.
Rubber Bumper –
Protects the machine in case of bumps.
4.
Extension Plate –
Removable when not needed.
5.
Hydraulic Motor –
Drives all the operation of the machine
such as speed control, forward-reverse switching motion,
and steering as well as the vibrator unit on the base.
6.
Rear Cover -
When lifted, allows access to the monitoring
lamps, valve unit, block diagram and owner’s manual.
7.
Receiver and Receiving Lamp –
Receives infra-red
signals from the transmitter indicated by the flashing light
on the receiving lamp.
8
.
Fuel Tank/Cap –
Fill with diesel fuel. Fuel tank holds
approximately 2 gallons (7.5 liters).
DO NOT
top off fuel.
Wipe up any spilled fuel immediately.
9.
Front Cover
- Allows easy pre-operational check and
refueling.
10.
Valve Unit –
Electromagnetic and hydraulic valve: controls
traveling speed and direction.
11.
Oil Tank –
Fill with proper grade of diesel engine oil.
12.
Vibrator Oil Drain
- Allows easy draining of vibrator oil.
13.
Reciever
- Located inside the compactor. Recieves signals
from portable transmitter durring remote operations.
14.
Transmitter
- Transmits operational signals to compactor
via the onboard receiver durring remote operations.