background image

MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS  MANUAL — REV. #0  (01/27/06) — PAGE 11

MVH-200DA2 — RULES FOR SAFE OPERATION

Maintenance Safety:

NEVER

 lubricate components or attempt service on a

running machine.

ALWAYS

 

 allow the machine a proper amount of time to

cool before servicing.

Keep the machinery in proper running condition.

Fix damage to the machine immediately and always replace
broken parts.

Dispose of hazardous waste properly. Examples of
potentially hazardous waste are used motor oil, fuel and
fuel filters.

DO NOT

 use food or plastic containers to dispose of

hazardous waste.

DO NOT

 pour waste, oil or fuel directly onto the ground,

down a drain or into any water source.

Loading and Unloading (Crane):

Before lifting, make sure that machine parts (hook and
vibration insulator) are not damaged and screws are not
loosened or lost.

Always make sure crane or lifting device has been properly
secured to the hook of guard frame on compactor.

NEVER

 lift the machine while the engine is running.

Use adequate lifting cable (wire or rope) of sufficient strength.

Use one point suspension hook and lift straight upwards.

NEVER 

allow any person or animal to stand underneath the

machine while lifting.

Try not to lift machine to unnecessary heights.

TRANSPORTING

ALWAYS

 shutdown engine before transporting.

Tighten fuel tank cap securely and close fuel cock to prevent
fuel from spilling.

Drain fuel when transporting compactor over long distances
or bad roads.

ALWAYS

 tie down the compactor during transportation by

securing the compactor's guard frame with rope.

Figure  18.  Lifting the Compactor

Emergencies

ALWAYS

  know the location of the

nearest 

fire extinguisher.

ALWAYS

  know the location of the nearest 

first aid kit.

In emergencies

 

always

 

know the location of the

nearest phone or 

keep a phone on the job site

.

Also know the phone numbers of the

 

nearest

ambulance

doctor

 and 

fire department

.  This

information will be invaluable in case of an
emergency.

MVH-200DA2

LIFT

Summary of Contents for Mikasa MVH-200DA2









































































Reviews: