![background image](http://html1.mh-extra.com/html/multiquip/mikasa-mt-86d/mikasa-mt-86d_operation-and-parts-manual_1855282011.webp)
MT-86D — PARTS & OPERATION MANUAL — REV. #7 (09/02/04) — PAGE 11
8.
Foot
–
Laminated wood with tempered steel plate for
superior shock absorption.
9.
Muffler–
Used to reduce noise and emissions.
10.
Engine Air Cleaner –
Prevents dirt and other debris
from
entering the engine.
11.
Decompression Lever
–
Use in the starting of the
engine. Press lever to engage. After engine starts lever
will return to original position.
12.
Fuel Filter –
Located inside fuel tank. Prevents dirt and
debris from entering fuel system.
13.
Recoil Starting Handle
–
Used when starting the engine.
Pull starter handle sharply and quickly, then return
starter handle to starter case before releasing.
14.
Handle –
To operate rammer
GRIP
handle assembly
firmly on both sides.
15.
Bellows –
Reservoir for oil bath.
Figure A shows the location of the controls and components
for the MT-86D Tamping Rammer. The functions of each
control is described below:
1.
Fuel Tank/Cap
–
Remove this cap to add
diesel
fuel.
Use high grade automotive diesel fuel only.
2.
Throttle Lever
–
Controls engine speed and the
tamping
action of the rammer.
3.
Engine Oil Dipstick
–
Indicates the level of the engine oil
Use CC class or higer grade motor oil.
4.
Oil filter
–
Prevents dirt and other debris from
entering the
engine.
5.
Oil Bath Fill Plug –
Open this plug to add oil to the oil
bath reservoir.
6.
Oil Level Sight Glass
–
Indicates the level of oil in the oil
bath reservoir.
7.
Drain Valve –
Open this valve to remove oil from the
bellows.
MT-86D — CONTROLS AND COMPONENTS
Figure A. MT-86D Tamping Rammer