![background image](http://html1.mh-extra.com/html/multiquip/mikasa-mdr-9d/mikasa-mdr-9d_operation-and-parts-manual_1855274020.webp)
PAGE 20 — MQ-MIKASA MDR-9D VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #0 (12/17/03)
CHECKING SCRAPER BAR
1.
Check scraper barand make sure that they are not clogged
with mud, bent or damaged (Figure 6).
2.
Adjust clearance between drums and scrapers as
necessary.
CHECKING BOLTS, NUTS, AND SCREWS
1.
Check bolts, nuts, and screws on various parts of the
machine, including the engine, for proper tightness.
Be careful not to confuse the water tank with
the oil tank.
CAUTION
POSITIONING THE HANDLE BAR
1.
Release the handle bar release pin (Figure 15) and position
the handle bar to the lowered position before starting
operation.
2.
When machine is not in use, release the handle bar release
pin and position the handle bar to the upright position.
CHECKING LEVERS
1.
Check travel and vibrator levers to make sure they are
functioning properly (Figure 6).
2.
With travel lever placed in reverse, push the deadman
device and verify that the travel lever returns to neutral
position. The travel lever stays in neutral position once the
deadman device is released.
CHECKING WATER TANK
1.
Check the water tank to see if filled. Add water if necessary.
The water tank has a capacity of approximately 6gallons
(23 liters) (Figure 14).
Figure 14. Water Tank Check
Figure 15. Handle Bar Positioning
MDR-9D — INSPECTION/START-UP
1. Set the
Speed Control Lever
(Figure 16 to a position
half way between start and stop.
INITIAL STARTUP (Crank Handle Start)
Selecting a lower engine
speed will reduce smoke
when starting.
Figure 16. Speed Control Lever
NOTE
Handle Bar
Release Pin
Summary of Contents for Mikasa MDR-9D
Page 2: ...PAGE 2 MQ MIKASA MDR 9D VIBRATORY ROLLER OPERATION AND PARTS MANUAL REV 0 12 17 03...
Page 13: ...MQ MIKASA MDR 9D VIBRATORY ROLLER OPERATION AND PARTS MANUAL REV 0 12 17 03 PAGE 13 NOTE PAGE...
Page 103: ...MQ MIKASA MDR 9D VIBRATORY ROLLER OPERATION AND PARTS MANUAL REV 0 12 17 03 PAGE 103 NOTE PAGE...