![background image](http://html1.mh-extra.com/html/multiquip/hhn34tvdtcsl4/hhn34tvdtcsl4_operation-manual_1855349013.webp)
HHN-34TVD • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #1 (05/08/06) — PAGE 15
Emergencies
■
ALWAYS
know the location of the
nearest
first aid kit.
■
Know the phone numbers of the nearest
ambulance, doctor and fire department.
Ensure
that a phone or radio is readily available at the
jobsite. If this is not possible, know the location of
the nearest phone. This information will be
invaluable in the event of an emergency.
HHN-34TVD — RULES FOR SAFE OPERATION
■
DON'T POLLUTE! Waste oils and other chemicals must be
disposed of in a manner consistent with local and state
environmental protection regulations. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.
■
DO NOT use plastic food containers to dispose of hazardous
waste.
■
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
Maintenance Safety
■
ALWAYS
know the location of
the nearest
fire extinguisher.
■
Orientation of the Battery
The positive cable , normally red, is associated with the "+" symbol
on the battery. The negative cable, normally black, is associated
with the "
-
" symbol on the battery. The positive cable is connected
to the positive terminal on the battery and the negative cable is
connected to the negative terminal.
■
Replace batteries that have cracked or broken cases or
batteries that are otherwise leaking electrolyte.
■
Always replace with battery of equivalent type and rating.
Never replace with a non-rechargeable battery.
■
Always dispose of battery properly. Bring to appropriate facility
for lead reclamation. These facilities can generally be found
in the local phone listings under "Recycling Services".
■
A good practice is to isolate the machine when removing the
battery.
■
ALWAYS
shut down the engine and disconnect battery before
performing service or maintenance functions. Contact with
moving parts can cause serious injury.
■
Securely support any trowel components that must be raised.
■
NEVER lubricate components or attempt service on a running
trowel.
■
ALWAYS
allow the trowel a proper amount of time to cool
before servicing.
■
Keep the trowel in proper running condition.
■
Make sure that there is no buildup of concrete, grease, oil or
debris on the machine.
■
Fix damage to the trowel immediately and always replace
broken parts.
2
1
1.
Negative Cable (BLACK)
2.
Positive Cable (RED)
To order go to Discount-Equipment.com