Operating instructions:
Rx 12 DS
receiver
modelltechnik gmbh • Neuer Weg 15 • D-75223 Niefern
Using the receiver with three batteries
In this mode a separate battery is used for each of the
following
• the RF section (receiver electronics),
• servos 1 to 6, and
• servos 7 to 12
A divided power supply offers three advantages:
•
if your model carries a large num ber of servos, the
current load on each battery is reduced.
•
"emergency operation" is possible if one battery fails:
vital control functions are "doubled up" and the servos
shared by the two batteries
•
the two servo groups can be operated with different
numbers of cells if you are using servos of suitable
specification.
Batt ery f or:
se rvo s 1 -12
RF s ection
Ba ttery for s ervos 7 - 12
