Power Supply
(included)
Power Supply
Adaptor
(included)
TV outputs
(8)
Power LED
Modulator inputs
(2)
Antenna/CATV
Model 8200
Top View
Accessories
2
The 8200 Coaxial Cable Panel is the heart of a multi-
room video distribution system. The 8200 connects as
many as 8 televisions to cable or antenna, while
maintaining compatibility with ChannelPlus video
modulators and the ChannelPlus standard IR repeating
system.
Model 2010
Power Injector wall plate
(fits standard Decora)
Model 2184
IR Breakout
Replaces the power supply
adaptor and drives up
to four IR emitters.
+12
GND
LED
-
+
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
LOSS-LESS COAX PANEL
The model 8200 works like a zero-loss splitter! The
signals you put on the antenna/CATV input will
appear on the outputs at the same power.
Typical System
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
FREEDOM OF PLACEMENT
Put the 8200 coax panel where the coax is: in the
attic, in the basement or in the wall of the garage.
The single coax from a model 2010 carries power,
the RF signals and IR repeating signals.
Remote Power Using the Model 2010
Model 2010
Power Injector
IMPORTANT:
The model 2010 must
connect to this port. If
the 2010 is not being
used, then install a
75 ohm terminator here.
3
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
INPUTS
MODULA
TORS
A
B+Pwr
OUTPUTS
Ant
/
CA
TV
INPUT
+15Vdc
IR
Out
Gnd
For use with model
2133 IR targets
model 8200
Coaxial Cable Panel
To
TVs
R
Shielded 75 ohm coax is
required. We recommend RG-6.
Modulators may be connected
to the ‘A’ or ‘B’ ports.
Power Supply
(included)
Power Supply
Adaptor
(included)
TV outputs
(8)
Power LED
Modulator inputs
(2)
Antenna/CATV
Model 8200
Top View
Accessories
2
The 8200 Coaxial Cable Panel is the heart of a multi-
room video distribution system. The 8200 connects as
many as 8 televisions to cable or antenna, while
maintaining compatibility with ChannelPlus video
modulators and the ChannelPlus standard IR repeating
system.
Model 2010
Power Injector wall plate
(fits standard Decora)
Model 2184
IR Breakout
Replaces the power supply
adaptor and drives up
to four IR emitters.
+12
GND
LED
-
+
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
LOSS-LESS COAX PANEL
The model 8200 works like a zero-loss splitter! The
signals you put on the antenna/CATV input will
appear on the outputs at the same power.
Typical System
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
FREEDOM OF PLACEMENT
Put the 8200 coax panel where the coax is: in the
attic, in the basement or in the wall of the garage.
The single coax from a model 2010 carries power,
the RF signals and IR repeating signals.
Remote Power Using the Model 2010
Model 2010
Power Injector
IMPORTANT:
The model 2010 must
connect to this port. If
the 2010 is not being
used, then install a
75 ohm terminator here.
3
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
INPUTS
MODULA
TORS
A
B+Pwr
OUTPUTS
Ant
/
CA
TV
INPUT
+15Vdc
IR
Out
Gnd
For use with model
2133 IR targets
model 8200
Coaxial Cable Panel
To
TVs
R
Shielded 75 ohm coax is
required. We recommend RG-6.
Modulators may be connected
to the ‘A’ or ‘B’ ports.
All manuals and user guides at all-guides.com
