21
# 21 4211
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope
that you are happy with the contents of your kit. However, we would ask you to check all the parts before you start
construction, as
we cannot exchange components which you have already worked on
. If you find any part is not
acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model Department.
Please be
sure
to include a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit
contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please
understand that we cannot entertain claims against us if the kit contents do not agree in every respect with the instructions
and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating
them safely requires a certain level of technical competence and manual skill, together with discipline and a
responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in
serious personal injury and damage to property. Since we, as manufacturers, have no control over the
construction, maintenance and operation of our products, we are obliged to take this opportunity to point out
these hazards, and to emphasise your personal responsibility.
Additional items required for the Mini Mag:
Adhesive and activator
Use medium-viscosity cyano-acrylate adhesive (“medium cyano”) in conjunction with activator
(“kicker”). Do not use styrofoam cyano. Epoxy glues appear to produce strong joints, but the strength is only superficial
and the hard adhesive tends to break away from the components under stress. Hot-melt glue can also be used.
MULTIPLEX radio control equipment for the Mini Mag:
PiCO 5/6
UNI receiver
35 MHz A
Order No.
5 5920
alternatively:
40 MHz
Order No.
5 5921
or:
Micro IPD
UNI receiver
35 MHz A
Order No.
5 5971
alternatively:
40 MHz
Order No.
5 5972
Nano S
UNI or HS 55 servo (2 x required)
Elevator / rudder
Order No.
6 5120
and (optional):
Nano S
UNI or HS 55 servo (2 x required)
Ailerons
Order No.
6 5120
300 mm UNI extension lead
Aileron servos, 2 x
Order No.
8 5031
if necessary: 200 mm UNI separation filter cable
Aileron servos, 2 x
Order No.
8 5035
MagicMixer #1
for 3-channel transmitter without mixers
Order No.
7 3000
Y-lead
(UNI) for 4-channel transmitter with separate rudder control
Order No.
8 5030
MULTIcont X-16 UNI
Speed controller
Order No.
7 2271
MULTIPLEX Permabatt NiMH flight battery (AA cells)
7 / 1500 mAh
Order No.
15 6030
or
MULTIPLEX Permabatt NiMH flight battery (AA cells)
8 / 1500 mAh
Order No.
15 6037
or
MULTIPLEX Li-Batt (Li-Po) flight battery P-CS
2 / 1-2000 mAh
Order No.
15 7016
or
MULTIPLEX Li-Batt (Li-Po) flight battery SH BX
2 / 1-2100 mAh
Order No.
15 7130
Battery charger:
MULTIcharger LN-5014 DC (charge current 100 mA … 5 A) 1 - 14 NiCd/ NiMH
Order No.
9 2531
and 1 - 5 Li-Po cells
Optional:
Float set
Order No.
73 3069
Tuning 1: Easy Glider power set (3:1 gearbox and Permax 400)
Order No.
33 2688
plus 3.5 mm Ø propeller driver
Order No.
33 2310
and 8 x 3.8” propeller
Order No.
73 3139
Tuning 2: Powerset „sport“ BL 22/18
Contents: motor, propeller driver, speed controller, propeller
Order No.
33 2627
Tools:
Scissors, balsa knife, combination pliers, cross-point / slot-head screwdrivers for servo output arm screws and motor
screws, soldering iron.
Note: please separate the illustrated pages from the centre of this booklet.
GB
