8
10
12
9
11
13
When pairing the thermostats with the Wiring Center you can assign a group to a programmable
thermostat. This will allow control of up to 11 group thermostats. There can be maximum 2 groups per
Wiring Center. Please follow the on screen instruction in order to complete the pairing process.
Please follow the on screen instruction in order to complete the pairing process. After that continue by
associating the TRV(s) to the thermostat(s) (mandatory). Max 6TRVs!
To identify your devices, tap the icon on the app screen. The LED (or screen) on the enquired device
will flash.
Pairing with the TRV - online
Pairing with the boiler receiver RX1/RX2 - online
Device identification
Setting the schedule
Factory Reset
Tap Scan for equipment to add your
thermostat.
1
2
3
5
4
Make sure the TRV is in pairing mode.
Make sure your receiver is in pairing mode. Please check receiver manual for full process.
6
9
8
7
10
12
11
13
1
2
3
4
Note:
The TRV LED will flash orange until the association
process is complete. Once this action has finished the LED
will go off.
Tap Scan for equipment to add your
thermostat.
1
2
3
5
4
5 Sec
5 Sec
For pairing with RX2, set
the internal switch of the
receiver to RX2 and choose
at step 4. After
that, follow the same
procedure as described
above.
6
9
7
10
8
11
12
13
Note:
Once connected to the App, the time and date will update automatically. Select the desired
programming mode (5/2 days, 7 days or 24h) and create your own schedule.
3 Sec
3 Sec
1
2
3
4
5
1
3
5
2
4
6
Select the wiring centre number with or
(max 9). Confirm your choice by .
Select the group number with or .
Confirm your choice by .
Grouping (Offline only).
