14
Basic Operation:
1. Power on/off
Press the /CLK button to turn the player on. Similarly, press it and hold this button for 2 secon
-
ds in power-on status to power off.
• Starting your vehicle’s engine can create voltage fluctuations; therefore only turn on the
player when the engine is already running. Conversely, first stop the engine, and only then turn off
the player when powering off.
• When you turn on the player, it remembers the last volume and tone settings.
2. Mode switching
You choose from the following signal sources by pressing the MODE button:
Rádio FM
SD,MMC
USB
AUX
• When you turn on the player it reverts to the last used signal source
• If the USB and SD sockets are empty, only the FM radio and AUX modes are available
• If an external unit is connected to both the USB port and the SD socket, then the USB port
takes precedence. In this case you cannot select the SD input by pressing the MODE button.
• The player always starts playback from the last connected external unit. E.g., if you have
a memory stick connected to the USB port and plug in an SD card, the card becomes active and
playback starts automatically.
3. Setting the volume
Turn the SEL button to adjust the volume to the desired level.
• If the player is currently not in the volume control mode, then keep pressing the turning knob
until you reach the VOL mode.
• You can adjust the volume between 0 and 64. When the volume is set to “0”,the speaker
switches off.
• If you make no change for 3 seconds, the player automatically reverts to the previous
function.
Press the SEL button repeatedly to select the setting you wish to adjust:
BAS
TRE
BAL
FAD
EQ
BACKLIGHT
VOLUME
LOUD
ON/OFF
You can adjust the setting by turning the knob.
• If you make no change for 3 seconds, the player automatically reverts to the previous
function.
• By default the knob adjusts the volume.
Summary of Contents for som. ROCK
Page 1: ...Manualdousu rio User sManual Manualdelusu rio som...
Page 33: ...33 www multilaser com br...
Page 34: ...www multilaser com br...