Multilaser ROCK+TV P3227, Manual

Page: 14 / 20

25 24
• If you insert a device at an angle, you can damage the connection socket on the player itself.
• SD cards are preferred over USB sticks because their design allows you to connect them in a safer
and more stable way. In addition, SD cards do not stick out of the player, which reduces the risk of
damaging the player by accidentally hitting the connected device or the magnetic lid. Any damage
resulting from such user error is not considered as a manufacturing defect, and is not covered by
the warranty.
• You can leave SD cards safely in the socket; the card fits under the closed magnetic lid.
Warnings: The manufacturer takes no responsibility for lost or
damaged data, even if such loss or damage occurs while using the
player. Before connecting the storage device, it is recommended
to create a backup of the data and tracks on it on your personal
computer.
PROPER USAGE OF USB STICKS/SD CARDS
To avoid malfunction and errors, please observe the following:
• Carefully read the instructions of the USB/SD storage device or
media player.
• Do not touch the connectors with your hand or any object; keep the
connectors clean.
• Protect the USB/SD device from strong shocks.
• Do not bend, drop, disassemble or modify these devices, and protect
them from humidity!
Do not use or store the devices in the following locations:
• Anywhere inside the vehicle where they are exposed to direct sunlight or high temperature.
• Any place with a high humidity or where corrosive materials are present.
• Place the devices in a location where they do not hinder you in driving.
• Further important notes:
• USB/SD memory devices may not function properly at extremely high or low temperatures.
• Only use high-quality USB/SD devices. Depending on their type and condition, even such high-
TEMPERATURE
Before turning on the player make sure that the temperature inside the car is between -10°C
and +55°C, as the product is only guaranteed to operate properly within this temperature range.
Extreme weather conditions can damage the product.
FINDING THE RIGHT LOCATION AND INSTALLATION
When installing the product, make sure it will not be exposed to any of the following:
• direct sunlight or heat (e.g. from the heating system)
• wetness, high humidity
• a significant amount of dust
• strong vibration
USING THE USB/SD CONNECTOR
• You can connect a USB stick (“pen drive”), MP3 audio player, MP4 media player or similar devices
to the players USB port. The memory card slot can host SD/MMC cards. Supported file format for
playback: MP3 audio files.
• In some cases, external USB/SD devices may not be guaranteed to work properly. Manufacturers
occasionally change the internal design of their products (e.g., replace a chip used inside), which
does not change the product’s main technical parameters, but it can affect the operation of devices
designed for a similar but previous generation product. It is therefore possible that even products of
the exact same type yield different results. Do not use a USB hub; extension cords are allowed. Do
not connect both a USB stick and an SD card at the same time to the player.
• It is recommended to store the tracks you wish to play in the root folder. You can define the playba-
ck order of the tracks by renaming the files or adding a number at the front. We do not recommend
the use of storage devices over 8GB because a large number of tracks can increase the time needed
to access each track. Only store MP3 files for playback on the storage device; the presence of other
data/files can slow down the player or interfere with playback.
• The player detects MP3 files stored in subfolders as well, up to a depth of 6 subfolders.
• In order to protect their precision connectors, it is important to always insert and remove USB/SD/
MMC devices in a straight position.
1. Product apresentation 1. Product apresentation