56
Backlight
This is to adjust the back light brightness
Volume
Click to adjust the loudspeaker’s volume Switch on/off screen click sound
GPS info
Click to check the current satellite signal
Language
This is to set the prompt language
Time and date
This is to set the system time and date and show the system time zone
Calibration
Calibrate the touch screen
Navi Path
Set the path of the map
System information
This allows you to reset the device to factory defaults, and implement GPS
reset and touch screen calibration.
7.1 Volume Setting
The volume setting is shown as Figure 7-2:
1)
Loudspeaker’s volume adjustment;
2)
Setting of “Screen Click Sound”.
F
igure
7-2: s
etting
oF
Volume
interFaCe
Close
Click to quit the volume adjusting application;
Volume -
The system provides ten-grade volumes (from silence to maximum); click
to decrease the volume in one grade;
The system provides ten-grade volumes (from silence to maximum); click
to increase the volume in one grade;
Screen tap sound
Click it to select Loud, soft or OFF;
Current volume
The red bars refer to the volume grade with one bar indicating one grade
Summary of Contents for GP011
Page 102: ...www multilaser com br ...
