7
2.0
Product Features
Auto-Cross over for MDI/MDIX at UTP port
Auto-Negotiation or Forced Manual mode for UTP port
Supports Dual Rate (100/1000) SFP for selectable Fast or Gigabit speed on fiber
Supports 802.3X flow control Enable or Disable
Supports Jumbo Frames up to 9K bytes
Supports 16 Tag VLAN Groups
Supports 802.1Q tagging and 802.1ad double VLAN tag (Q-in-Q)
Ingress/Egress Bandwidth control with 64K granularity
Supports 802.3ah-OAM loop back and dying gasp (remote power failure detection)
Supports firmware upgrade via Web
Supports Digital Diagnostics (DOM) for supported SFP
Provides product information for management
Includes RMON counters (stand-alone only)
Supports password setting for authentication
Supports Link Fault Pass Through (LFP) Function
Supports Auto Laser Shutdown (ALS) Function
Supports DHCP client for automatic TCP/IP configuration
FM
X-GE-1000
SFP socket supports a wide range of standard SFP modules to address any network situation.
Single-mode, Multi-mode, Multi-rate, Dual Rate (100/1000), Single fiber bi-directional, Coarse and Dense Wave Division Multiplexing (CWDM
and DWDM) and Copper media
WARNING:
Fiber optic equipment may emit laser or infrared light that can injure your eyes. Never look into an optical fiber or connector port.
Always assume that fiber optic cables are connected to an active laser light source.
