background image

2

IMPORTANT SAFETY INFORMATION

WHAT’S INCLUDED

OPERATION

• 

Soldering iron with holder and cleaning sponge.

• 

Instruction manual.

When using electrical appliances basic safety precautions should always be 

followed.

• 

Check that the voltage indicated on the rating plate corresponds with that of the 

local network before connecting the appliance to the mains power supply.

• 

Do not operate the appliance with a damaged plug or cord, after a malfunction or 

after being dropped or damaged in any way.

• 

If the supply cord is damaged, it must be replaced by a qualified engineer in order 

to avoid injury or a hazard.

• 

There are no user-serviceable parts in this product. Refer servicing to qualified 

personnel.

• 

The soldering tip of this tool become extremely hot during use. Let these parts cool 

down before touching or changing tips.

• 

Do not expose to rain or moisture.

• 

Do not leave the appliance unattended when it is switched on.

• 

Do not use in the presence of an explosive atmosphere.

• 

A fire may result if the appliance is not used with care, therefore be careful when 

using the appliance in places where there are combustible materials. Be aware 

that heat may be conducted to combustible materials that are out of sight.

• 

This appliance is not intended for use by persons (including children) who are not 

mentally able, physically capable, experienced or do not understand the product.  

They should be given supervision and instruction in the use of the appliance by a 

person responsible for their safety.

• 

Children should be supervised to ensure that they do not play with the appliance.

• 

Do not apply heat to the same place for a long time.

• 

Ensure there is sufficient space and ventilation around the appliance to allow the 

escape of heat and/or fumes.

• 

Never place the product or part of it in water, or operate if your hands are wet.

• 

Always observe the safety instructions and applicable regulations.

• 

Always place the tool in it’s holder when not in use.

• 

Disconnect from the mains supply when not in use.

• 

Do not file down the tip.

Note:

 The first time you use the soldering iron, it may smoke slightly as the heating 

element dries out. This is normal and should only last for a few minutes. 

•  ONLY USE FOR ELECTRICAL WORK 

- Acidic solder will damage the iron tip. 

Designed for use with lead free solders. 

• 

Connect the mains lead and plug into the mains supply and turn on the power.

Please read these instructions carefully before use and retain for future reference.

Reviews: