Page <2>
V1.0
24/09/21
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
Attention
On first use the soldering iron may produce smoke, this is just grease used in manufacturing burning off. It is not harmful to
the product or user.
Specifications:
Votage: 220-240V~ 50Hz
Power: 48W
Features
• Heater: Mica, 160˚C-480˚C
• User-friendly with compact design.
• With a mini drawer on the base to hold the spare parts.
• Temperature set by knob.
Caution
Please note the following safety notes to avoid malfunctions, damage or physical injury:
• Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised for
their safety by a qualified person or are briefed by the responsible person how to use the unit.
• Do not leave packaging materials in the range of children, they may become dangerous toys.
• Do not leave the unit unsupervised while it is turned on. Keep children away while the unit is in use. Do not allow children
or people in need of supervision to use the unit.
• Do not continue using the unit after it or its power cord has been damaged.
• Do not run the power cord around sharp edges or over hot surfaces.
• Do not touch any hot surfaces. The soldering tip becomes very hot during operation.
• Be extra careful when using the soldering iron around combustible materials.
• Place the soldering station on a solid, level surface.
• During soldering harmful fumes may escape. Work only in well aired spaces or under a suitable air extraction system.
• Protect your eyes and body from splashing hot solder by wearing suitable protective equipment.
• Turn off the unit and pull the power plug while you are not using the unit or before cleaning. Do not pull on the power cord,
always grasp the plug itself.
• Allow the unit to cool down before cleaning or storing.
• Do not use the unit outdoors.
• Do not immerse the unit in liquids of any kind. Do not use the unit to heat plastic or liquids.
• Do not disassemble the unit or try to repair it yourself. It does not contain parts serviceable by you.
Operation
• Unpack the soldering station and check all parts. Damaged parts must not be put into operation.
• Put the holding rack for the soldering iron sideways in the soldering station, wet the cleaning sponge in the sponge rack
with water.
• Put the soldering iron in the holding rack
• Place the soldering station on a solid and dry surface
• Connect the mains plug to a socket and turn on the soldering station by using the power switch (I=ON/0=OFF).when
turned on, the power switch is lit
• Always put the soldering iron on the holding rack when it is heating up or during breaks from soldering
• Make sure the contracts for soldering on the work place are clean
• Only use solder for electronics. Acidic solder can damage the soldering tip or the work piece
• Regulate the desired temperature of the soldering iron with the adjusting knob.
• The color-coded areas are equal to following temperatures:
