8-Advanced Function of Oscilloscope
58
To use the cursor for a time measurement, do the following:
1.
Press the
MENU
key and the function menus are displayed at the right of the screen.
2.
Press the
MENU
▲
or
MENU
▼
key to select
CURS MEAS
.
3.
Press the
F1
key to select the measurement type as
Time.
Two vertical dashed lines T1 and
T2 appear on the screen.
4.
Press
OPTION
and display as
—
Cursor 1
—
Cursor 2
Press
▲
(OPTION) or
▼
(OPTION) and see T1 move left and right and LCD display the time
value match T1 to point position in panel; press
◄
( OPTION) or
►
( OPTION) and see T2
move left and right and LCD display the time value match T2 to point position in panel.
Now, you can see a screen that looks like the following figure 48.
Figure 48: Cursor time measurement
When log out submenu, every value will show on the right bottom of the screen as figure 49: