background image

 
 
 
 

                                                                                                         

 
 
  6. REPLACEMENT OF BATTERIES 
 
     

When the battery becomes exhausted or drops below the operating voltage, the "B"                 

      mark is displayed. Turn the power switch to "OFF", prior to installing batteries. 
      To install the batteries, remove the battery cover located on the unit back. 

(See Fig.2) 

      Insert the two LR-44 or SR-44 into the battery case making sure that proper 
      polarity is observed. (See Fig.3) 
      Always replace both batteries at the same time. If the difference between the   
      voltages of the batteries is big, the measurement error may be caused. 
                     

   

          Pull up

                       

Place batteries with positive side up 

                                       

 

 

                                                                                                   

                                                                                                 

                          Fig.2                                                                      Fig.3 

 

 

 

REPAIR SERVICE                                                                                                                                       

 

When requesting for repair service, please bring the instrument directly to the dealer 
where you bought. 
When mailing the instrument, always pack it in its original or equivalent packing 
materials to avoid any damage during the transportation and also put together with 
documents showing your name, address, phone number and defect point. 
 

 

WARRANTY                                                                                                                       

 

This instrument is sent out from our factory after the sufficient internal inspections 
but if you find any defect due to the fault in our workmanship or the original parts, 
please contact the dealer where you bought the instrument. 
 
The warranty period is 12 months from the date of purchase and the instrument shall 
be repaired at free of charge, provided that we judge the cause of defect is obviously 
resulted from our responsibility. 
 
 
 
         

MULTI MEASURING INSTRUMENTS CO.,LTD. 

                                    Akihabara Murai Bldg., 7F, 1-26 Kanda Sakuma-cho, 

                                    Chiyoda-ku, Tokyo,101-0025 Japan 

                                    TEL : 81-3-3251-7016    FAX : 81-3-3253-4278 

                                    Home Page : 

http://www.multimic.com/

 

                                    E-mail : [email protected]         

Summary of Contents for 210

Page 1: ...tions With proper use and care your tester will give you years of satisfactory service 1 FEATURES Wide range of current measurements from AC 0 01A to 200A with 33mmφ CT Data hold function Especially useful when working in dark or hard to get areas Ultra compact size and high accurate AC clamp on tester 2 SPECIFICATION Measuring method Dual integration mode Display 3 5 digit LCD Range AC 20A 200A R...

Page 2: ...r consumption Approx 2 5mW Battery life Approx 100 hours LR 44 Approx 200 hours SR 44 Size 48 W x146 H x20 D mm Weight Approx 80g Accessories Batteries LR 44 2 Instruction manual 1 Soft case 1 3 CAUTION Before operating this instrument familiarize yourself with all instructions outlined in this manual Always check to make sure that the function switch is set to the proper position When making meas...

Page 3: ... to OFF It is impossible to make measurement if the data hold switch is set to ON Remove the batteries if the tester will not be used for a long period 5 2 AC Current Measurement Set the power switch to ON position Set the range selector switch to appropriate range to the current to be measured Clamp the conductor of the circuit under test with current transducer Note Clamp around only one conduct...

Page 4: ...u bought When mailing the instrument always pack it in its original or equivalent packing materials to avoid any damage during the transportation and also put together with documents showing your name address phone number and defect point WARRANTY This instrument is sent out from our factory after the sufficient internal inspections but if you find any defect due to the fault in our workmanship or...

Reviews: