MultiMobile Owner’s Manual
26
Windows NT 3.51 / NT 4.0 Installation
1.
Install the PCMCIA support for your particular
make and model of laptop from the Service
Packs.
Note that: These must be verified to be working
properly before continuing, and Support for this
level of driver is from the laptop manufacturer
only.
2.
From the Main window, select Control Panel.
3.
In the Control Panel, select Network Icon.
4.
In Network Setup, select Add Adapter.
Windows NT will display a list of all available
drivers.
5.
Select OTHERS for third-party adapters not
included in the list. The program prompts for the
directory containing the Ethernet drivers.
6.
Insert the Driver disk in the floppy (e.g., A) drive
and type A:\ . Windows NT tries to locate the
OEMSETNT.INF file in the specified path. If it
exists there, Windows NT will then copy the
appropriate drivers to the Windows NT system.
The drivers are now properly installed Proceed
to the next steps, and refer to your Windows NT
installation guide for information on these steps.
7.
Windows NT pops up a window to ask the
values of some keywords (e.g., IO Port, IRQ
Number, and Memory Base). After initial
installation, the drivers are permanently
installed to the Windows NT system.
Subsequent access of the Network Drivers list
will include these drivers as options.
