Software
RAW (802.3) Frames Network Number _____________
LCC (802.2) Frames Network Number ______________
TYPE_II Frames Network Number _________________
SNAP Frames Network Number ___________________
WAN Network Number __________________________
When you manually assign network numbers, you must
make sure they match the network numbers assigned to
your local file server (if any).
12. WAN: Enter the WAN network number for the Frame
Relay WAN Port by clicking the Network Number box,
backspacing through the default number, and entering
your new WAN Number. Make sure the WAN network
number is the same as the MultiFRAD on the other end of
the link.
The WAN network number has to be assigned by the
Network Administrator and must be unique throughout the
entire internetwork.
Note: The WAN port does not have the capability of
learning the network number, unlike the LAN port (i.e., the
WAN port does not have a file server).
13. Click OK when you are satisfied with your selections.
14. If you clicked OK from the IPX Protocol Default Setup
dialog box (step 9), the IP Protocol Default Setup dialog
box is displayed.
15. To change the IP parameters, proceed to the next step.
Clicking OK advances to the WAN Ports Default Setup
dialog box. The WAN Ports Default Setup starts at step
21.
15
