HARDWARE AND SPECIFICATIONS
12
MultiConnect
®
Dragonfly
™
Nano MTQN-MNG1-B02 Device Guide
Power Draw
Voltage
Radio
Protocol
Power Saving
Mode and
Power Down
(AVG) Measured
Current at Max
Power
1
TX Pulse
2
(AVG)
Amplitude Current for
Peak Current
Total Inrush
Charge
3
in
MilliCoulombs
(mC)
5 Volts with
Unit In Dev Card
LTE
15
μ
A
172 mA
381 mA
0.04 mC
1
Maximum Power:
The continuous current during maximum data rate with the radio transmitter at maximum
power.
2
Tx Pulse:
The average peak current during a GSM 850 transmission burst period or LTE connection.
3
Inrush Charge:
The total inrush charge at power on.
USB Cable Recommendations
If your device has a USB connector, to avoid enumeration or power issues:
Use a high-speed USB cable that is as short as possible.
Use a well-shielded cable with at least 24 AWG wire pair for power/ground and 28 AWG wire pair for data
lines.
If possible, use a USB port that connects directly to the motherboard rather than a USB port with added
cabling inside the computer chassis.
Use USB 3.0 ports if available. These ports are typically rated for more current.
You can order the USB cable through MultiTech. The part number is: CA-USB-A-MICRO-B-3.
