Chapter 2 – Dialing Services
Multi-Tech Systems, Inc. AT Commands for Wireless Modems with IP Connectivity (S000333D)
10
#PPPMYIP Sets IP Address When Using PPP
Definition:
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter setting), it is
in charge of the IP address attribution mechanism.
Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP stack for
an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the peer that has
been previously stored in the TCP/IP stack parameters. If the remote accepts this address, the IP link is
then established.
This parameter defines the IP address to be attributed to the TCP/IP stack when the PPP Server mode
is running.
Values:
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).
Default 0.0.0.0
Syntax:
Set Value: AT#PPPMYIP=<value>
Get Value: AT#PPPMYIP? or AT#VPPP, AT#VALL
#PPPPEERIP Sets IP Address for Remote PPP
Definition:
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter setting), it is
in charge of the IP address attribution mechanism.
Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP stack for
an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the peer that has
been previously stored in the TCP/IP stack parameters. If the remote accepts this address, the IP link is
then established.
This parameter defines the IP address to be attributed to the remote PPP peer when the PPP Server
mode is running.
Values:
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).
Default 0.0.0.0
Syntax:
Set Value: AT#PPPPEERIP=<value>
Get Value: AT#PPPPEERIP? or AT#VPPP, AT#VALL
#PPPSERVUN Sets User Name for Remote PPP Client
Definition:
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter), it checks
the remote PPP client login/password before granting access to the server.
This parameter defines the user name that must be specified by the remote PPP client.
Values:
Alpha-numeric ASCII text string up to 64 characters.
No default.
Syntax:
Set Value: AT#PPPSERVUN=<value>
Get Value: AT#PPPSERVUN? or AT#VPPP, AT#VALL
#PPPSERVPW Sets Remote PPP Client Password
Definition:
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter setting), it
checks the remote PPP client login/password before granting access to the server.
This parameter defines the password that must be specified by the remote PPP client.
Values:
Alpha-numeric ASCII text string up to 64 characters.
No default.
Syntax:
Set Value: AT#PPPSERVPW=<value>
Get Value: AT#PPPSERVPW? or AT#VPPP, AT#VALL
#APNPW Sets Access Point Name Password
Definition:
#APNPW is the Access Point Name password parameter coming with the APNUN from the GSM
operator and provides GPRS access.
Values:
Alphanumeric ASCII text string up to 120 characters.
No default.
Syntax:
Set Value: AT#APNPW=<value>
Get Value: AT#APNPW? or AT#VGPRS, AT#VALL
