4 |
D r o i t d ’ a u t e u r M u l t i P S I . T o u t e s l e s i n f o r m a t i o n s c o n t e n u e s d a n s c e d o c u m e n t s o n t s u j e t t e s à
m o d i f i c a t i o n s a n s p r é a v i s . C o p y r i g h t M u l t i P S I . A l l i n f o r m a t i o n c o n t a i n e d h e r e i n i s s u b j e c t t o c h a n g e
w i t h o u t n o t i c e .
Important safety information
1.
Before using the sprayer, make sure the battery is fully charged and the filter cotton is in the filter cotton
is not blocked ;;
2.
Do not use special working liquid. When adding liquid, be careful not to exceed the maximum capacity
to avoid the outflow of the liquid.;
3.
In order to ensure the atomization effect, the factory has limited the motor speed range, do not open
without changing. The use of water soluble liquid requires no impurities to prevent the blockage of the
pipeline;
4.
The power should be cut off immediately if any of the following happens during the use : the sprayer
gets wet or gets water inside ; The fan suddenly stopped running ; The fan sound changes obviously ;
Liquid leakage in small tank ; The fan does not turn when the fan is started and other conditions that may
cause danger obviously;
5.
Work must wear overalls, protective masks;
6.
A small amount of clean water should be added to the small tank after the completion of spraying liquid
to prevent the liquid blocking or corrosion of the nozzle. After use, the power should be cut off in time
to clean the small tank. When handling pesticides, the safety instructions provided by the pesticides
manufacturer should be followed. The machine should be placed in a save position to avoid being wet,
knocked against or touched by children;
7.
Do not use the machine in the rain, equipment should be used away from flammable, explosive, high
temperature places ; Do not frequently switch the machine, so as not to damage the motor;
8.
In case of failure, the power must be cut off, please professional repair ; It is strictly prohibited for non-
professional personnel to disassemble, should ask professional maintenance point maintenance
personnel to repair, remember not to repair without authorization, not without authorization to change
the original product on the « leakage protection plug type power cord », so as to avoid danger.
