2) Set range switch to [125V] or [250V]. (By whichever range, AC 0~600V can be measured
in the same way).
3) Contact measuring probe (LINE) and clip (EARTH) to the circuit or the live part of
equipment to be measured.
4) Read the voltage value after the display got stable.
~
4. REPAIR SERVICE
When requesting for repair service, please bring the instrument directly to the dealer where
you bought.
When mailing the instrument, always pack it in its original or equivalent packing materials to
avoid any damage during the transportation and also put together with documents showing
your name, address, phone number and defect point.
5. WARRANTY
This instrument is sent out from our factory after the sufficient internal inspections but if you
find any defect due to the fault in our workmanship or the original parts, please contact the
dealer where you bought the instrument.
The warranty period is 12 months from the date of purchase and the instrument shall be
repaired at free of charge, provided that we judge the cause of defect is obviously resulted
from our responsibility.
Set OFF
ACV
! WARNING
1) Do not apply the voltage exceeding AC 600V to prevent electric failure and or burnout
of the instrument.
2) Do not apply voltage under the condition of measuring switch MEASURE on, as it
may cause electrical shock and or instrument damage.
