Data hold indication
"D
･
H" mark on LCD readout
Data output
DC 100mV to each range full scale (DC50mV/1000A)
Sampling time
2 times/sec.
Limitation of circuit voltage
Less than AC 600V
Withstanding voltage
AC2000V/1 minute between CT core and outer case
Operating temperature
0
℃
to +40
℃
,
＜
80%RH (non-condensing)
Storage temperature
-10
℃
to +60
℃
,
＜
70% RH (non-condensing)
Power supply
UM-4 (1.5V)x2
Power consumption
Approx. 3mW
Battery life
Approx. 350 hours (by alkaline batteries)
Size
138(W)x225(H)x37(D)mm
Weight
Approx. 500g
Accessories
Batteries (UM-4)……….….2
Instruction manual……..…1
Carrying case………...…….1
Optional accessory
Cable for recorder output (MR-002)
4. DIMENSIONS AND PANEL FUNCTION
①
①
Current transducer (Jaw)
②
Jaw opening lever
③
Data hold switch
④
LCD display
⑤
Range selector switch
⑥
Power switch
②
⑦
Wrist strap
⑤
⑩
⑧
Output terminal for recorder
⑨
⑥
⑨
Battery cover
③
⑩
Filter switch
④
⑦
⑧
3. CAUTION
●
Before operating this instrument, familiarize yourself with all instructions
outlined in this manual.
●
Always check to make sure that the function switch is set to the proper position.
●
When making measurements, use CAUTION as dangerous voltages may be
present in normally safe areas.
●
To avoid electrical shock, use CAUTION when working above 60V DC or 25V AC
rms. Such voltages pose a shock hazard.
●
Never make measurements with the battery cover OFF.
●
Never fail to keep the maximum tolerable input.
●
Never operate this instrument if it becomes wet, damp or has any liquid
condensation build-up on any part of the instrument.
●
Never make measurements for uninsulated conductors or bus bars.
