background image

FCC/DOC REGISTRATION AND SERVICE/WARRANTY

INFORMATION

Caution: Users should not attempt to

make such connections themselves, but

should contact the appropriate electric

inspection authority, or electrician, as

appropriate.

The Load Number (LN) assigned to each

terminal device denotes the percentage of

the total load to be connected to a telephone

loop which is used by the device, to prevent
overloading. The termination on a loop may
consist of any combination of devices
subject only to the requirement that the total
of the Load Numbers of all the devices does

not exceed 

100.

Notice: This product has been tested and

meets the Class B limits for radio
noise emissions set out by the
Radio Interference Regulationsof

the Canadian Department of Com-

munications.

LIMITED WARRANTY

We warrant that if this Versa-Link ATX-300

product, manufactured by Multi-Link, Inc. and
purchased by you, proves to be defective in
material or workmanship, we will provide

without charge, for a period of two (2) years

(U.S. Only), the labor and the parts neces-

sary to remedy any such defect. Warranty

period commences on the date of purchase
by the original retail consumer.

The duration of any implied warranty of

merchantability, fitness for a particular
purpose, or otherwise, on this product shall
be limited to the duration of the applicable

express warranty set forth above. In no

event shall we be liable for any loss,
inconvenience or damage whether direct,
incidental. consequential or otherwise

resulting from breach of any express or

implied warranty, of merchantability, fitness

for a particular purpose, or otherwise with

respect to this product, except as set forth

herein. Some states do not allow limitations

on how long an implied warranty lasts and

some states do not allow the exclusion or
limitation of incidental or consequential

damages, so the above limitations or

exclusions may not apply to you.
To obtain service under this warranty, you

must present or send your ATX-300 product

together with a copy of the retail seller’s

original bill of sale, your charge or credit
card receipt, or other satisfactory proof of

the date of the original retail purchase of the

product, to any Versa-Link authorized
service stations. A list of the Versa-Link
authorized service stations can be obtained

from your Versa-Link dealer of from Multi-

Link, Inc.

The AC adaptor used with this product is
covered under this warranty. This warranty
does not cover damage which results from

accident, misuse, abuse, improper line

voltage, fire, flood or damage resulting from

repairs or alterations performed other than
by Versa-Link authorized service stations.

This warranty gives you specific legal rights,

and you may also have other rights which

vary from state to state.

SERVICE INFORMATION

Your machine has been registered with the

Federal Communications Commission, and

under this program, in the event of equip-
ment malfunction, all repairs will be per-

formed by Multi-Link, Inc. or a warranty

repair center that we have authorized. The

owner is restricted from performing any

maintenance operation other than those

specified within this instruction manual.

If you require service, please contact your

Versa-Link dealer or Multi-Link, Inc.

 MULTI-LINK 

225 Industry Pkwy. 

Nicholasville KY 40356

(859) 8856363 

Fax (859) 885-6619

DON'T FORGET YOUR

W A R R A N T Y   C A R D !

VERSA-LINK  ATX-300

29

 1992 

Muti-Link, Inc.

Summary of Contents for Versa-Link ATX-300

































Reviews: