manualshive.com logo in svg

Multi-Link Line Hunter, Product Manual, Page: 12 / 14

Share
Download
Multi-Link Line Hunter Product Manual Download Page 12

The Line Hunter is a rack mounted panel that is designed
to be screwed to a standard (EIA) 19.00" or 23.00"
equipment rack cabinet or wall bracket using
four 5/8" x 12-24 screws (supplied).

1 . Slide Line Hunter into equipment rack and secure with 4 screws.

2. Plug the AC power cord into AC receptacle.

3. Program Dip Switch (if factory default settings are not suitable for application).

4. Insert device patch cords in appropriate port on Line Hunter panel. Use standard 6 or 8 position modular

plugs.

7 TECHNICAL SPECIFICATIONS

I nput Power Requirements

Voltage: 110-125 Volts AC only, 50-60 Hz

Current: less than 1 OOmA

CO Interface:

REN: (to be determined)
I nput Ring Detection: 40-150 Volts AC, 15-68 Hz.

Device Interface:

Battery: -48 Volt DC to all 12 device ports
Off-Hook detection: 6-150 mA

Power Consumption: 12 Watts

Connectors:

CO Interface: 11 0-type-4-pair punch-down

Device Interface: 8-position modular, compatible with both standard 6-position RJ-1 1 and 8-position

modular plugs.

Trunking: 12 device ports/ 4 CO line ports

225 Industry Parkway - Nicholasville, KY 40356 - Ph. 800-535-4651

or

1 2

Summary of Contents for Line Hunter















Reviews:

No comments