Multi Channel Systems PGA16 Manual Download Page 5

  

- 5 - 

2    Important Information and Instructions 

2.1   Operator's Obligations  

The operator is obliged to allow only persons to work on the device, who    

 

are familiar with the safety at work and accident prevention regulations and have been instructed  
how to use the device;    

 

are professionally qualified or have specialist knowledge and training and have received instruction  
in the use of the device;    

 

have read and understood the chapter on safety and the warning instructions in this manual and 
confirmed this with their signature.  

  

It must be monitored at regular intervals that the operating personnel are working safely.  

Personnel still undergoing training may only work on the device under the supervision of an experienced 
person.  

  

  

2.2   Guarantee and Liability  

The general conditions of sale and delivery of Multi Channel Systems MCS GmbH always apply. The operator 
will receive these no later than on conclusion of the contract.  

Multi Channel Systems MCS GmbH makes no Guarantee as to the accuracy of any and all tests and data 
generated by the use of the device or the software. It is up to the user to use good laboratory practice to 
establish the validity of his findings.  

  

Guarantee and liability claims in the event of injury or material damage are excluded when they are the result 
of one of the following: 

 

Improper use of the device.   

 

 Improper installation, commissioning, operation or maintenance of the device.   

 

Operating the device when the safety and protective devices are defective and/or inoperable.   

 

Non-observance of the instructions in the manual with regard to transport, storage, installation, 
commissioning, operation or maintenance of the device.  

 

Unauthorized structural alterations to the device.   

 

Unauthorized modifications to the system settings.   

 

Inadequate monitoring of device components subject to wear.   

 

Improperly executed and unauthorized repairs.   

 

Unauthorized opening of the device or its components.   

 

Catastrophic events due to the effect of foreign bodies or acts of God. 

   

Summary of Contents for PGA16























Reviews: