Step 1
Place protective cardboard or blankets on the floor (make sure there is no debris)
and place the top of the table upside down as per the diagram below (Fig.1)
There are 3 x table leg marked clearly with white stickers ( 1, 2 and 3 ). Underneath the
table, there are corresponding marks ( 1, 2 and 3 ).
Fit the pedestal table leg ( 1 ) to underside of table marked ( 1 )
and do the same with pedestal leg ( 2 ) to underside of table ( 2 )
and do the same with pedestal leg ( 3 ) to underside of table ( 3 ).
Important Notice : Ensure the bolts are inserted as below
Centurian Dining Table
DT06-A
Assembly Instruction
Step 2
Fig.1 (Shows the table upside down on the floor ready for assembling)
Page 3
1. Attach the Pedestal leg into the Table Top with the positions of the locating tenons top support,
Tighten the Deck screws firmly using spanner (make sure with the washer)
2. Attach the Base support into the Pedestal leg (It’s required
“1, 2 or 3” marked on underside of table must be matched with “1, 2 or 3” marked
on each Pedestal leg and Base support.
one person to hold
the base support while the other attach the Middle Pedestal leg, locate special washer and nut onto
the threaded bolt and tighten the nut using spanner (not provided).
3. Do the same way for the other Pedestal leg
Note :
(B) Pedestal
(A) Table Top
(D) Top Support