6
Connecting and configuring external devices
Camera
38
V9.20191001
31302713-02-US
Connecting the camera AgCam PAL
Camera AgCAM PAL with adapter cable
Plug for connection to the display.
CAM port
Part numbers of the extension cable:
10 ft: DMAC-EC10
20 ft: DMAC-EC20
30 ft: DMAC-EC30
40 ft: DMAC-EC40
50 ft: DMAC-EC50
60 ft: DMAC-EC60
80 ft: DMAC-EC80
Camera
Part number: DMAC-RC-PAL
Connector for the adapter cable
Camera plug
Connector for the extension cable
Connector for the camera plug
Part number of this adapter cable: DMAC-
MLR01
1.
Connect the cables to each other as shown in the figure. Pay attention to cable lengths when
doing so.
2. CAUTION! When laying out the cable, ensure that no kinks form in the cable, and that no
one can trip over the laid-out cable.
3.
Lay out the cable. Ensure that the cable reaches the display and is not damaged during
operation.
4.
Secure the cable with cable ties.
5.
Secure the camera.
6.
Connect the camera to the display. Use the
CAM
port to do this.
7.
8.
When disconnecting the cable from the display, use the enclosed rubber gasket to seal the
exposed connector.
Activating a camera
In order to activate a camera, you must activate the "Camera" plug-in.
1.
- Open the Service application.
Procedure
6.4.2
Procedure
