Mounting and configuration
Configuring the GPS receiver
3
V7.20170405
11
Value
Used satellites and correction sig-
nals
Advantages
Accuracies
increases path-to-path
accuracy.
P-t-P = path-to-path accuracy
Abs. = Absolute accuracy
Information for GLIDE
If you have selected a correction signal with GLIDE, please note:
▪ Switch the GPS receiver off when driving on roads.
▪ After starting the systems each time, it takes ca. 5 minutes until the system is
ready for operation. Wait on the field to be worked during this time, before you
start working.
▪ Ensure that the GPS receiver does not lose the GPS signal during work. If the
signal gets lost, it can cause the GLIDE to restart. This can lead to track offset.