5. Assembly of frame profiles and panels
Screen
refugio 2.0
LIGNODUR
When mounting the other profiles
pay attention to equal directions.
For this purpose, a mark is made
on the straight panels.
In the case of inclined panels, the
direction arises as a result of the
profile geometry. Complete the
assembly with a frame profile.
cross-section
straight panel
mark
The joint covering must end 8 mm below the top edge of the posts.
Please fix the post cap with a mounting adhesive (not supplied).
5.1
5.2
5.3.1
5.3.2
5.3.3
5.1 Checking the clearance
Always start the assembly process
with a frame profile. In order that
the profiles in the post have suffici-
ent splay to compensate for chan-
ges in length, the frame profiles
and panels must be 55 mm longer
(max.) than the clearance between
the posts.
Example:
Clearance: 1580 mm =>
Profile length max. 1635 mm.
If necessary, shorten the profiles
accordingly.
5.2 Assembly of the panels
5.3 Installation of the joint covering and post cap
