MuL Technologies 3 Series Page 39 User Manual Download

Page: 39 / 44

Check Engine light codes

Yellow Check Engine light codes:

Code Meaning

Comments

0000

LEDs missing.

The cart will operate normally but will not communicate direction or

other status via the LED indicator lights.

0010

Battery pack missing.

The battery pack is not communicating its status to the mainboard.

The battery can still be checked using the physical button on the

battery itself. Please see section titled Using MARC battery packs.

1025

Distance sensor error (FL).

Front left distance sensor malfunctioning.

1026

Distance sensor error (FR).

Front right distance sensor malfunctioning.

1027

Distance sensor error (RL).

Rear left distance sensor malfunctioning.

1028

Distance sensor error (RR).

Rear right distance sensor malfunctioning.

1090

Access point error.

Access point missing or malfunctioning. MARC will perform normal

operations, but the software update procedure will not function.

1100

Speaker error.

The cart will operate normally but will not communicate status via

the audio cues.

1110

Weight sensor error.

Weight sensor missing or malfunctioning.

FRONT

(End with e-stop)

REAR

(End with handle)

Right rear

Left rear

Right front

Left front

Overview of cart

orientation

Summary of Contents for 3 Series













































Search results

Summary of Contents for 3 Series

Reviews:

Related manuals for 3 Series

Brands by name

Popular brands

MuL Technologies 3 Series, User Manual

Search results

Summary of Contents for 3 Series

Reviews:

Related manuals for 3 Series

Brands by name

Popular brands