MuL Technologies 3 Series Page 3 User Manual Download

Page: 3 / 44

Congratulations – and thank you!

MARC®

is made by the highly experienced team at MūL

Technologies® –

manufacturers who want to bring autonomous mobile robots (AMR) that make

practical sense to warehousing, manufacturing and logistics companies.

MūL Technologies’ approach to AMR is different:

We take commercial off-the-

shelf (COTS) components and add minimum custom hardware to create

intelligence/movement. MARC is the most cost-effective autonomous material

handling solution on the market.

Finally, “the rest of us” have an affordable way to get all the benefits of AMR.

Thanks again – and know we are here for you!

Sincerely,

The MūL

Technologies team.

PLEASE READ THIS ENTIRE MANUAL BEFORE USING MARC. IT CONTAINS

CRITICAL INFORMATION ON USING MARC SAFELY AND BEST PRACTICES FOR A

SUCCESSFUL IMPLEMENTATION.

MūL Technologies Products are proudly designed and manufactured in the United States.

Summary of Contents for 3 Series













































Search results

Summary of Contents for 3 Series

Reviews:

Related manuals for 3 Series

Brands by name

Popular brands

MuL Technologies 3 Series, User Manual

Search results

Summary of Contents for 3 Series

Reviews:

Related manuals for 3 Series

Brands by name

Popular brands