background image

Descriptions of Functions

Press to play a demo song, press it again to stop.
Continue pressing to switch between songs.
When demo songs are playing, the piano keys will not work.
Demo songs will play on repeat until the “demo” or “stop” 
buttons are pressed. 

Press once to activate the echo function.
Press again to activate the sustain function.
Press a third time to return to normal.

Press the tone button to change the piano tone.
Press again to go to the next tone.
After the eighth tone, it will cycle back to the first.

4. Record & Play

   Press the record button and the “metronome” sound will begin. 
   Start playing what you want to record now. 
   When you’re done playing your song, press the play button and
   your recorded music will play. 
   You can record using any of the 8 tones, but you cannot change
   the tone while recording. You can change it during the playback.
   After playing your recording, the piano will automatically revert 
   back to recording mode. Simply press play if you want to hear
   your recording again. 
   Recordings are not stored in the piano after it is turned off.

5.  On/Off/Volume

   To turn the piano on, roll the wheel on the side of the control 
   panel clockwise. To turn it off, roll it counterclockwise.
   

A red LED light will appear to signal that the piano is ON.
To increase the volume, continue turning the wheel clockwise.
To lower the volume, turn the wheel counterclockwise.

. Care Instructions

    Remove batteries when not using the piano to avoid damage.
    For best results, use on a flat, level, and dry surface. 
    Roll it up loosely. Rolling it too tightly could damage the inner 
    connections. 
    Do not attempt to pull, stretch, or twist the piano. 
    Do not use it in high temperatures or in wet areas. 
    Do not attempt to take it apart. 
    Do not use near strong radio waves. 

.  Simple Troubleshooting

    If the piano stops working or begins to make abnormal sounds:
i. Replace the batteries. Make sure to use brand new batteries of the same brand. 
ii. If new batteries are not available, plug into USB power. 
iii. Turn the piano all of the way off and disconnect from power to restore original 
    settings (i.e. unplug from USB cable or remove batteries). 

6.  Power Saving

    If the piano is not played for 3 minutes, it will enter into 
    “sleep mode”. 
    Press any key to “wake up”.

. Package Contents

    1 – 49 key piano
    1 – USB Power Cord
    1 – User Manual
    1 – Color coded song booklet

Reviews: