06
INSTALLATION
(Figure A)
(Figure B)
(Figure B)
(Figure C)
(Figure C)
1. Insert 2.5” IDE hard drive (HDD) into the slot.
Turn the front side upward.
2. Make sure that the IDE 2.5” HDD pins align
to the device slot.
3. Connect the USB cable to the USB port on
the PC. Once connected properly, the HDD
should be automatically detected and be
ready for use.
2.5” IDE Hard Drive Installation:
( Figure A )
Don’t connect the 4-pins on the left side to the device.
Computer
IDE 2.5”
Hard Drive
IDE 2.5”
Hard Driv
e
IDE 2.5”
Hard Drive
SATA/IDE to USB 2.0 Adapter
B
2.5”
B
IDE 2.5”
Hard Drive
TransImp-SATA/IDE
to USB 2.0 Adapter
Once the power comsumption of PCIE bus is not
enough, please connect the power connector of
USB cable to the USB 2.0 port of motheroard.