Static electricity may cause a malfunction. To rectify, press
the initialization button.
If dirty, wipe the clock using a soft cloth with a small
amount of diluted neutral detergent or soap and water.
Then wipe with a dry cloth.
Avoid using benzene, thinner, alcohol or aerosol clean-
ers to clean the case.
Do not place small parts and the battery within reach of small children. If accidental swallowing occurs, immediately seek
medical advice.
If liquid leaked from a battery contacts the eyes, rinse the eyes with clean water immediately and consult a doctor for the
necessary treatment. There is a risk of losing eyesight. Also, if the liquid contacts the skin or clothes, rinse with water.
Do not short-circuit, disassemble, heat or expose to fire. These actions may result in the leakage of liquid, heating or an explosion.
This product complies with all relevant and effective
European Community legislations.
This product complies with all relevant and effective
UK legislations.
This symbol on the product, packaging, and/or
accompanying document indicates that this product
should not be disposed with normal household
waste. This product shall be taken to the applicable
collection point for recycling. The correct disposal of
your old product will help prevent potential negative
consequences for the environment and human
health. For more information about recycling of this
product, please contact the shop where you
purchased the product, or your local authority.
This symbol on the battery or on the packaging
indicates that the battery provided with this product
shall not be treated as household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct disposal
of batteries helps to prevent potentially negative
consequences for the environment and human
health.
Imported to EU by MUJI Deutschland GmbH
Kurfuerstendamm 236, 10719 Berlin, Germany
Imported to UK by MUJI EUROPE HOLDINGS LIMITED
21a John Street, London WC1N 2BF, UK
Imported to Australia by MUJI RETAIL(AUSTRALIA)PTY LTD
Level 5 90 William Street Melbourne, VIC 3000, Australia
User manual
Model No. MJ-DBC2
DIGITAL BATH CLOCK
Press the button and a beep will sound. The countdown will start.
Hold down the button to fast-forward by 30 seconds.
* The countdown can be set up to .
* If the alarm is not stopped for 2 minutes, countup timer starts
automatically.
If the clock does not function
properly, for example, because
of a display malfunction, remove
and then replace the battery.
Before using this product please read thoroughly the “Precautions regarding waterproofing”. Using the product without
strictly following the contents laid down in these precautions may cause a malfunction.
●
Important points regarding usage
As malfunction may be caused, pay careful attention to the points below.
Do not put anything in the holes on the back of the speaker. This can result in the loss of the waterproofing function.
Do not soak the product in or put any of the liquids listed in the example below on the product. Also do not put sand or mud
on the product.
Example liquids: soap, detergent, water containing bubble bath or similar, seawater, swimming pool water, hot spring water,
boiling water, pharmaceutical products, etc.
Do not float the product on water or submerge it in water when using. Also, do not intentionally splash water on it.
* It is possible to operate the buttons with hands wet with water.
If a lot of water is splashed on the product or if it falls into a body of water, wipe the water off immediately with a dry cloth.
After using the product in a place such as a bathroom, wipe the moisture off and place the product in a location with a low
moisture level.
Do not use the product in locations with a high temperature and humidity, such as saunas or bedrock baths.
When you are moving the product from a cold place to a warm bathroom, for example, move the product after it has
reached a normal temperature. If there are sudden changes in the temperature, condensation is produced inside the
product and can cause malfunctioning as a result of problems such as the development of rust and the shorting of the
battery or circuit.
Change the battery in a place with low humidity and with hands wiped dry of water.
Do not disassemble this product.
Press and release
forward
back
Press and hold
Fast forward
Fast rewind
⊕
⊖
⊕
⊖
Place the + of the (CR2032)
battery facing upwards.
blink.
To start setting the
calendar and time press
the
⊕
or
⊖
button
as soon as the display
starts flashing.
January 1, 2011 12:00 a.m.
If it is difficult to remove the battery,
use a thin and insulated stick like a
toothpick by inserting it into this part
and take the battery out.
Good positioning
Bad positioning
(It is easy for water to penetrate the product)
Do not dip the product in water.
Do not touch with soapy hands.
EN
User Manual Serial No. 8ZDA20AZ-EN8(Y2111)
Incorrect use of battery can cause battery leakage, heating or explosion, leading to injury or damage to the clock.
Regularly replace the battery with a new one once a
year even if the clock is still working.
Do not drop or subject to strong impact as a clock is a precision instrument. Doing so may cause malfunction or
damage.
Do not disassemble or modify, this may result in a malfunction.
Waterproofing: Splash-resistant type, IP code IPX4
(W3.7x D1.0x H2.1 in)
(0.18 lb)
Do not insert the plus (+) and minus (–) ends of the battery in reverse.
Use the battery specified by the manufacturer.
Remove any flat battery as soon as possible.
Remove the battery from the clock when not in use for a long time.
Do not charge the battery.
Do not use in the following locations. Doing so may cause the device, case and/or battery to deteriorate, resulting in
inaccuracy or shortening the life of the clock and the battery.
●
Although this product is designed for usage in places where water splashes, such as near a shower,
it is not completely waterproof
.
●
The waterproof effect of the waterproof packing gradually declines. The progression of the deterioration varies depending on the environment in
which the product is used.
●
When the battery cover is securely attached, this product is designed to have a waterproof level equivalent to the IP code IPX-4 (splash-resistant
type).
Regarding waterproofing
* IPX-4 is the splash-proof protection standard.
It is confirmed that water does not penetrate the product in the conditions assumed by usage in the vicinity of a shower with water splashing from
all directions for a period of 5 minutes.
* The waterproof function is designed to work for both fresh water and tap water.
Locations where the temperature e50 °C (122°F).
For example, extended exposure to sunlight. Locations near heating or other apparatus with hot blasts or flames.
Locations where the temperature is lower than –10 °C (+14 °F). The quality of plastic components and batteries will
deteriorate.
Locations with long periods of high temperature and humidity, such as in a sauna or bedrock bath.
Locations with a strong magnetic field, such as in the proximity of television sets, office automation equipment, audio apparatus,
etc. Magnetic fields may cause the clock to accelerate, decelerate or stop.
Locations where strong vibrations exist such as in a train, in a ship or at a construction work site.
Locations where gas exists such as at the site of a hot spring.
Locations where large quantities of oil are used. (Oil in the form of a mist will adhere to the case and machine parts, staining the
clock or causing the clock to stop.)
If directly attached to flexible PVC for a long period of time, colors may transfer or stain each other.
Do not insert anything in the
holes in the temperature
sensor or speaker.
This may cause a malfunction.
it is also unsuitable to use for precise
temperature control.
Problem
Cause and Solution
Troubleshooting
Check the following items if the product does not appear
to be working properly.
・
The clock keeps beeping.
・
The display is not showing.
The battery is dead.
Remove the battery or
replace it with a new one.
