18
9
* side should be facing up and push the filter
all the way back.
I
nsert the filter into the body with the pull tab facing the front.
I
nsert the filter into the body.
d
e
4
3
*
I
f the filter or filter cover is not inserted correctly, the product will not function.
R
eplacing the filter cover.
P
ull tab
(Top & bottom)
F
ilter cover
▲
▲
B
ody
360°
Deodorizing
Dust Collector
Filter
I
nsert the bottom tab of
the filter cover into the
tab slot of the body.
*
M
atch the
▲
mark of the filter cover with the same
mark on the body.
P
ush the filter cover hinge down in the
direction of the arrow shown to close.
*
T
here is a top and bottom to the filter. Insert the filter with facing the top, and
push all the way in.
Before Use
①
How to Clean the Dust Sensor
How to Clean the Dust Sensor
R
emove the sensor cover.
a
b
c
d
W
hen the lens that detects dust becomes dirty with moisture, nicotine from cigarettes etc, it
reduces the level of sensitivity. Please clean it regularly as shown below, vacuum the
surrounding dust with a vacuum cleaner, remove dirt with a dry cotton bud.
*
R
ecommended cleaning every 3 months.
U
se a vacuum cleaner to remove the
surrounding dirt that is covering it.
R
e-attach the sensor cover
after cleaning.
W
ipe the top left side of the lens with a
dry cotton bud.
*
K
eep the cover in a safe
place so you don't lose it.
*
F
irmly attach all the way
until you hear it click.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
