-18-
・
Always tilt the diffuser unit in the direction of the
water draining mark as indicated to pour out water
remaining in the water tank.
* Never tilt the diffuser toward the air outlet when
pouring out water.
If water enters through the air outlet, it may cause
a malfunction.
4. Dispose of water in the water tank
5. Clean the ultrasonic diaphragm and water tank
・
Wipe the water tank using a clean cloth dampened in
a solution of warm water and neutral detergent;
wring the cloth out well before use.
・
Use a cotton swab or similar to clean the ultrasonic
diaphragm located at the bottom of the water tank.
・
After cleaning the tank and ultrasonic diaphragm, fill
the tank with tap water and run the diffuser on a
30-minute timer.
・
After the timer ends, pour out the water and wipe
dry with a clean dry cloth.
* Never directly touch the ultrasonic diaphragm at the bottom of the water tank with your
hand. Never subject the ultrasonic diaphragm to strong pressure.
* Any residual chlorine-based detergent, acidic detergent, or enzyme-based detergent in the
diffuser may result in the formation of toxic gas. Accordingly, always use a neutral detergent.
* Always clean the interior of the water tank every two to three days. Ensure that water
and parts are always kept clean.
Using the diffuser without regular cleaning may result in water stains or mineral build
up, resulting in degraded performance.
* Never use benzene, paint thinner, alcohol, or other chemicals to clean your diffuser.
Such chemicals may damage parts, wear down graduation marks, etc.
* A dirty ultrasonic diaphragm may result in malfunction or improper operation.
Periodically clean the ultrasonic diaphragm.
Water outlet
Ultrasonic
diaphragm
作成日̲2015-09-17
発注No.084-15A-001319-R03
資材̲ラベル（糊なし）MR70
pattern̲デメ
size̲150x149mm
超音波アロマディフューザー
約直径80×高さ140mm
4548718920136
page̲19/24
