20 | 28
M0588.docx | Rev 1.5 | Modified on 12/11/2018 | © Remote Control Technologies Pty Ltd
Section 4 – System State
The system state section (Figure 8, section 4) displays the device information, diagnostics, counters and
device configurations. The system state section is always the centre column of the screen.
Device Information
Device information consists of fields which can be edited to record details relating to the setup and installation
of the device. This device Information is stored in the device itself. The general fields are:
■
Device Name
■
Install Date
■
Install ID
■
Install Type
■
Install Comments
There is currently no rule on the contents of each field; this may change in the future as more devices are
configured.
Figure 13 Device Info example
Counters
The lube controller has diagnostic counters which record the number of times certain events occur. This
information is displayed in the counters section of the system state section.
Figure 14 Lube controller counters
There is diagnostic material contained in the device information section. This information is mainly used by the
manufacturer and as such, it will not be discussed here.
Timers and Device Function Specifics
The last section in the system state section (Figure 8, section 4) is for timers and function specifics.
Timers can be set up simply by changing the time. All timers use the format of
HH:MM:SS
. The seconds field
can be adjusted in increments of 0.1 second. The timers section can also be used as a visual indication of the
progress of that timer when running the lube controller.
Figure 15 Timers running for a lube controller
