M0712.docx | Rev 4.1 | Modified on 13/05/2021 | © Remote Control Technologies Pty Ltd
17 | 20
Technical Specifications
Dimensions, controller only:
Length: 119 mm | Width: 80 mm | Height/Depth: 65 mm
Dimensions, boxed for freight:
Length: 220 mm | Width: 120 mm | Height/Depth: 120 mm
Weight, controller only:
255 g
Weight, including loom / packaging
for freight:
600 g
Input nominal voltage:
12 to 24 Vdc
Ignition output continuous current
maximum:
10 A standard
Auxiliary output continuous
current maximum:
0.7 A
Operating temperate range:
−40 °C to +85 °C
Connection types:
12-pin receptacle
Inputs:
Ignition supply, battery supply, chassis ground
Min & max input voltage:
9 to 35 Vdc
Circuit protection:
External control
Enclosure type:
Polycarbonate / alloy base for heatsinking
Environmental protection IP rating:
IP67
Programming/adjustment:
Refer to the
Calibration
section.
Compliance and Standards
RCT has an obligation as a manufacturer to comply with the regulations as required by the relevant regulatory
bodies, depending on the market and location.
This product currently complies with the following:
ACMA
■
IEC 61000-6-1:2005 Electromagnetic Compatibility (EMC) – Part 6-1: Generic Standards – Immunity for
Residential, Commercial and Light Industrial Environments.
■
IEC 61000-6-3:2006, A1:2010 Electromagnetic Compatibility (EMC) – Part 6-3: Generic Standards –
Emissions for Residential, Commercial and Light Industrial Environments.
EU
■
IEC 61000-6-1:2005 Electromagnetic Compatibility (EMC) – Part 6-1: Generic Standards – Immunity for
Residential, Commercial and Light Industrial Environments.
■
IEC 61000-6-3:2006, A1:2010 Electromagnetic Compatibility (EMC) – Part 6-3: Generic Standards –
Emissions for Residential, Commercial and Light Industrial Environments.
■
RoHS 2 Directive 2011/65/EU
FCC
This device is exempt from FCC regulations under 47 CFR 15.103 Exempted devices.
IC
This device is exempt from IC regulations under ICES-003 — Information Technology Equipment (ITE) —
Limits and Methods of Measurement.
Troubleshooting
Fault
Possible Cause
Device not working.
Check wiring and connections.
Intermittent fault.
Check wiring and connections.
