MANUAL: installation and operation of the „safety burner“
Seite 5 von 6
Ignition process
1.
Observe the following „
Notes on the ignition process
“.
2.
If necessary, remove the cover and use the operating aid provided for this purpose to pull the slider all
the way to the stop until the incineration slot is completely visible.
3.
Wait at least 30 seconds.
4.
Ignite the fireplace by placing a burning rod lighter on the combustion slot.
Deletion process
1.
Use the provided operating aid.
2.
Close the incineration slot completely and with a quick movement by moving the slider over it.
3.
If the burner can not be completely extinguished, place the cover on the burner with the handle
pointing upwards.
4.
Leave the burner closed for at least one minute before reopening it.
Notes on the ignition process
!
The device must not be ignited while still in warm condition.
!
A lighter must be used which ensures a sufficient safety distance.
!
The fireplace may only be operated when the incineration slot is fully opened, as otherwise the
maximum permissible service life could be exceeded.
