background image

IMPORTANT SAFEGUARDS 

2

This User Manual contains important information on how to install and set up your 

new range, safe use, and maintenance, as well as insights into the product features.  

READ  ALL  INSTRUCTIONS  BEFORE  INSTALLING  AND  OPERATING  YOUR  MUELLER 

PROFESSIONAL SERIES 36" FREESTANDING GAS RANGE FOR THE FIRST TIME. IF 

THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE, EXPLO-

SION OR BURN HAZARD MAY RESULT, CAUSING PROPERTY DAMAGE, PERSONAL 

INJURY OR EVEN DEATH. 

To  reduce  these  risks  when  using  this  product,  basic  safety  precautions  should 

always be followed, including the following: 
 

HANDLING AND UNPACKING

 

• WARNING: EXTREMELY HEAVY. 

Use proper equipment and adequate manpower to 

move the range to avoid personal injury or damage to the unit or the floor. The unit is 

heavy and rests on adjustable steel legs.

 

• Before moving the range, protect any 

finished

 flooring and secure the oven door 

closed to prevent damage.  

• 

WARNING:  DO  NOT  LIFT  OR  CARRY THE  COOKING  RANGE  BY THE  OVEN  DOOR 

HANDLE OR THE CONTROL PANEL. 

  

• 

IMPORTANT: LET THE RANGE REST FOR A PERIOD OF 24 HOURS ONCE YOU HAVE 

PLACED IT IN YOUR HOME. 

• Do not remove the rating label attached to the range. 
• Do not discard the anti-tip bracket or LP Gas Conversion Kit supplied with the range. 

 

CORRECT USAGE 

• This appliance is intended for use in domestic households and in similar working 

and residential environments.  

• This appliance is intended to be used for such purposes as cooking and keeping 

food warm. Do not use the appliance in any other way than its intended use.  

• This appliance is not intended for outdoor use. 

• 

Persons (including children) who lack physical, sensory, or mental capabilities, or 

experience with the appliance should not use it without supervision or instruction by 

a responsible person. 

• Do not use this range while under the influence of alcohol or other substances that 

affect your reaction time or perception. 

Summary of Contents for PROFESSIONAL GR-600B





































Reviews: