background image

GAS WARNING

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR 

AN EXPLOSION MAY OCCUR, CAUSING PROPERTY DAMAGE, PERSONAL INJURY 

OR POSSIBLE DEATH. 

DO NOT STORE OR USE GASOLINE, A LIQUID PROPANE CYLINDER OR OTHER 

FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE. AN 

LIQUID PROPANE CYLINDER NOT CONNECTED FOR USE SHALL NOT BE STORED 

IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

 

WHAT TO DO IF YOU SMELL GAS 

 Do not try to light any appliance. 

 Do not touch any electrical switch. 

 Do not use any phone in your building. 

 Immediately call your gas supplier from a neighbor's phone. Follow the gas 

supplier's instructions. 

 If you cannot reach your gas supplier, call the fire department. 

INSTALLATION

 

 Installation and service of your range must be performed by a licensed installer, 

an approved service agency or your gas supplier. 

 (In Massachusetts installation must be performed by a licensed plumber/ gas 

fitter.) 

 Note to the installer: Please leave this user manual with the consumer for the 

local electrical / gas inspector's use. 

Summary of Contents for GR-670





































Reviews: