attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
8
Rear Frame
Support
Seat Frame
Nylon Insert
Nylon Insert
Steel
Washer
Nylon
Washer
Steel
Washer
Nylon
Washer
D
A
Foot Platform
Plastic Coated
Cables
A
Plastic Coated
Cables
Steel
Washer
Nylon
Washer
Nylon
Washer
Steel
Washer
Steel
Washer
Nylon
Washer
Steel
Washer
Nylon
Washer
stEP 2.
Using (1) 5/16” x 2 3/4” hex bolt [D], (2) nylon inserts, (2) nylon
washers, (2) steel washers and (1) 5/16” nylock nut securely attach the
seat frame
to the
rear frame support
(Fig. 2).
stEP 3.
Connect the lower ends of
plastic coated cables
to pre-
drilled holes in
foot platform
. Secure firmly with (2) 5/16” x 1 3/4” hex
bolts [A], (6) nylon washers, and (2) 5/16” nylock nuts (Fig. 3).
A
Seat Frame
Seat Cushion
FIG. 2
FIG. 3
stEP 4.
Insert the
seat cushion
sleeve over
seat frame
and securely fasten using silent ties (Fig. 4).
FIG. 4
