4
Support
Connector
A
A
A
Male Support
Male Support
Female Support
Cross Support
Stabilizer
Male Support
Support
Connector
A
A
A
Male Support
Male Support
Female Support
Cross Support
Stabilizer
Male Support
Cross Support
E
C
Uses existing hardware
Stabilizer
Stabilizer
*
*
*
E
MTA3004-EX FIG 3
MTA3004-EX FIG 5
MTA3004-EX FIG 6
MTA3004-EX FIG 4
E
D
D
E
Cross Support
Cross Support
Stabilizer
Stabilizer
*
*
Uses existing hardware
*
STEP 9.
Using (2) 5/16’’ x 2 1/4’’ hex bolts [D], (4) nylon washers and (2) 5/16’’
nylock nuts secure the
cross supports
and
x supports
to the
ladder section
extension
. (Fig. 6)
STEP 10. SECURELY TIGHTEN ALL NUTS AND BOLTS.
NOTE:
Refer to the Instruction Manual provided with The Liberty (MTP3000)
to install your stand in the field. Follow all warnings and instructions.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS
INJURY OR DEATH!
