TP212 2-WAY SPEAKERS
Congratulations on your purchase of an excellent, high performance loudspeaker
system from MTX! We are confident that your purchase will bring you years of listening
pleasure.
MTX’s TP212 consists of dual 12” woofers matched with our X-radial designed horn
loaded high frequency tweeter designed to provide uniform sound dispersion, and cover-
age area, with excellent sound quality. Your TP212 speaker is designed to perform equally
well in many different applications, including low to mid level live sound reproduction, public
address, karaoke applications, or mobile entertainment. The long excursion woofer and
horn-loaded tweeter with high frequency protection circuitry make your TP212 suitable for
voice or music.
Your speakers carrying handles, mounted to a strong, lightweight cabinet make it easily
portable to use anywhere you need it. The rugged corner braces allow for upright positioning
and interlock for secure stacking of multiple cabinets. The versatile 5-way binding posts and
1/4" phone jack inputs make it easy to connect to any amplifier. You can use a single speaker
for mono or connect a pair to a stereo amplifier for a stereo pair.
WARNING:
To avoid injury, DO NOT SUSPEND the enclosure.
AMPLIFIER CONSIDERATIONS
Your speaker system specifications list RMS power and Peak power ratings. Power
amplifiers are also typically rated using RMS power, which is an indication of the power level
an amplifier is able to continuously deliver to a loudspeaker without damage or distortion
to the amplifier. Consult your amplifier owners manual to confirm power output at the rated
impedance at which your amplifier will be operating with the speakers connected. These
ratings should be considered when selecting the best amplifier to power your system. For
general use, amplifier output should match or exceed the RMS rated power of the speaker
system.
WARNING: Overpowering could cause serious damage to the loudspeaker.
HOOK UP
Your TP212 comes equipped with 5-way binding posts and 1/4” phone jacks for easy
connection depending on your needs.
CAUTION: Be sure your amplifier is turned off before you make any wire
connections.
5-Way Binding Posts
Use color coded, two conductor or stranded, twisted pair wire to connect your speaker
to an amplifier using the 5-way binding posts. Each has two individual conductors covered
with insulation, and are often marked to help you make the proper connections. Insulation on
one side of the wire might have a ridge or colored stripe. Or, the two conductors may have
different color insulation (red and black, for example). Be sure to connect (+) on the speaker
to (+) on the amp, and (-) on the speaker to (-) on the amp.
1) Separate the conductors at each end for about two
inches.
2) Strip away 1/2” of insulation from the end of each
conductor.
3) Unscrew the positive (+) terminal and insert the (+)
stripped end of a conductor wire into the hole on the
side of the terminal post.
4) Hand tighten the terminal to secure the wire in
place.
5) Connect the conductor wires other stripped end to
the amplifiers (+) terminal.
6) Repeat steps 3-5 to connect the speaker to the
amplifier’s negative (-) terminals.
225 Watts RMS/450 Watts Peak Power
Frequency Response: 30Hz-22kHz
4 Ohm
TP212
2 inches
1/2 inch
